Husqvarna Viking 413187045 Three-hole special yarn foot

Decorate your project with different types of decorative yarns using the wide range of Husqvarna Viking stitches and the three-hole special yarn foot. This foot allows you to easily guide the wire through the openings in the front to the back of the foot, passing through the groove under the foot. Decorative yarns will be sewn on top of the creation, creating a beautiful braid-shaped decoration.

1. Thread your machine with a regular sewing thread or with a decorative thread on the top and with a normal sewing thread in a bobbin.
2. Select a decorative stitch to cover the yarns.

• Note: Decorative stitches that have a forward movement allow for better use. (Avoid stitches with too many backward movements.)

3. Thread the decorative threads into the holes from the top of the presser foot, using the threader threader, before hooking the presser foot for the sewing machine
4. Make sure the yarns pass through the openings easily. (If the thread is too thick, too much tension is created and the transport may be affected.)
5. Attach the presser foot.
6. Place the line under the presser foot leaving about 5cm (2 inches) of tail.
7. Insert a hook-and-loop stabilizer under the fabric and place the fabric under the presser foot.
8. Sew carefully, not too fast. If your machine has a speed control, reduce the sewing speed so that you can easily guide the fabric and yarns.